Replacing Your Sliding Glass Door Rollers

If the sliding glass doors in your home are more than 10 years old, you might notice that they are becoming harder to slide open. This problem is even more common on aluminum frame dual pane doors. The reason is because the doors are heavier due to the dual pane glass, but many of the aluminum units did not use stainless steel rollers. So, in many cases, the rollers get rusty from moisture and they start to bind.

In order to replace the rollers, you have to remove the sliding panel from the opening. In most instances, the fixed panel must be removed in order for the sliding panel to come out. There is a simple way to determine whether or not your fixed panel has to come out as well. If the slider is on the inside track and the fixed panel is on the outside track, you have to remove both panels, because the slider will only come out from the outside. There is a lip on the bottom of the track inside your house. That lip keeps water from coming in. Unfortunately, that lip is also too high to lift the sliding panel up and over. So, you have to remove the fixed panel first, then lift and swing out the slider from outside. If you are one of the few people who have a slider on the outside track, then you can lift your slider out without removing the fixed panel.

But, let's assume you need to remove the fixed panel first. Here is what you do: Remove your screen door if you have one. The screen door will have two rollers on the bottom. Lift one end of the door frame with one hand while using a flat screwdriver to lift the roller off the track. Do that on both sides, then take out the screen door and set it aside. Now, look for a metal piece on the bottom track that runs from the bottom corner of the fixed panel all the way across to the bottom of the side jamb that has the door lock hardware. If your door is really old that piece might be missing. If you have one, you can pry it up from the track. It is snapped in place even though it looks like it is a part of the track. Once you have that piece removed, you want to look inside the house where the fixed panel is against the wall jam. Look for screws holding the frame to the jam. They usually have one near the top and bottom corners, and one near the center. Remove these screws and put them where you won't lose them. Now, you should be able to pull the fixed panel out of the side jam. There is a very good chance that it will be stuck. If it is, grab the center rail near the bottom and lift up as hard as you can. If you feel the panel go up, pull it back down. Do this a couple of times, then try to pull it out of the side jam again. This usually loosens it enough to pull it out. If it still won't come out, you will have to put a thin screwdriver between the fixed panel frame and the side jam and pry while a helper pulls the panel away from the jam. Once you get it free of the side jam, grab the fixed panel side rail and have a helper grab the other rail. Lift the panel up into the top track and swing the bottom out of the bottom track. Remove the panel from the top track and set it aside with the screen door.

Now, you can try lifting the slider up and out, just like you did with the fixed panel. If the slider won't clear the bottom track, you need to do a couple of things. First, look to see if it's the old rollers protruding from the bottom that is preventing the door from coming out, or if the actual bottom of the door frame is hitting the track. In almost all cases, it will be the old rollers. But, if the opening is 8' wide, sometimes the wood header that runs across the opening has sagged just enough to make it tight in the center of the opening. If it's the rollers, you need to adjust them all the way up into the door. Look for a hole on the bottom side where you can put a phillips screwdriver and find the adjustment screw. Then turn that screw counterclockwise as far as you can. Do that to both sides, then try lifting out the door. If you are still getting stuck, have your helper lift one side and pull outward while you try to pry the frame and roller over the track. If you get one side out, have your helper hold that side with his or her foot to prevent it from going back in while he or she lifts the other side for you to pry free.

Once you get the slider out, almost all rollers are held in place by the same screw that holds the frame corners together. So, you need to set the panel on one side, remove the screw in the corner, flip the panel over, remove the screw on the other bottom corner. Now, you can take a rubber mallet or the wood handle of a hammer, and tap the bottom frame off the glass. This will give you access to your rollers. Take a close look at how they are inserted into the door frame. In fact, it's a good idea to only remove one roller to bring with you to match for the new ones. Then, when you get back home, you can use the roller that is still in place as a guide to installing the new ones.

Places like Home Depot, Lowes, and Ace Hardware carry about 80-90% of the rollers out there. So, you should be able to find them. However, let's say this just isn't your lucky day, and you can't find your rollers anywhere. You are going to have to have them ordered. Bring the roller to your local glass shop. If you're lucky, they will have them in stock. If not, they can order the rollers, but you won't get them for about a week. Don't panic. Just go home and tap the bottom frame back on the door panel, but leave the corner screws out. You can even leave the roller out that you removed. Lift the door back in place, install the fixed panel but don't snap the bottom piece back in, and don't install the inside screws. Then, from inside the house, lift the slider and pull it closed. You don't want to drag it if you left the roller out. It will scrape the bottom track. Just lift it enough to take the pressure off, and close and lock it.

When Your new rollers come in, take everything back out and install the new rollers. Adjust the new rollers all the way up before putting the door back in. That way, the new rollers won't interfere with you lifting it back in place. Adjust the new rollers down until the door slides good and locks. You want to be sure there is an equal gap at the top and bottom when the door is about an inch from closing into the side jam. You can adjust the rollers to make this dimension even. If you can get the job done by a professional for $50 or $60 including parts, it might be worth hiring someone to do it. But, in high population areas such as Los Angeles, it's common to pay $100 in labor only. Then they mark up the cost of the rollers, and you could wind up spending $130 for a job that you can do yourself for about $20. Next week i'm going to tell you how to repair your broken or defective window glass.

John Rocco has been installing replacement windows since 1978. To learn more, visit How To Install Windows

---

Kitchen Remodel - How to Survive

You have decided to make the plunge and begin to plan your kitchen remodeling project. There are so many questions and you're not sure where to start. There are some steps you should... Read More

Hardwood Floor Refinishing - For The Faint of Heart

Are your beautiful hardwood floors not so beautiful anymore? Maybe they just need a refinishing job. It can be a daunting task, but here are some ideas to make it a little easier.If... Read More

How to Modify Your Landscaping to Protect Your House from Burglars

Believe it or not, landscaping can be an important part of a good home security plan. A burglar who is "casing the joint" from the street will choose the house with tall shrubs... Read More

Planning Permision Tips UK - 6 Common Design Mistakes When Extending a Residential Property

Don't you just love the design of some of these alpine chalets??!!**??One year we were given a loft bedroom that you couldn't stand up in with no wardrobe space and another chalet only... Read More

Discovering Fiberglass Roofing Panels for Your Roofing Needs

Roofs are an integral part of the house. The design of a roof tells a lot about the structure. They can be stylish, grand, historical, modern, versatile and so much more. When designing... Read More

Georgian And Victorian Style Conservatories

Georgian Conservatories Georgian architecture was the style of the 18th century, especially from the reign of King George I who ascended the throne in 1711, into the reign of King George IV. Design... Read More

The Different Roofing Materials Used for Flatroofs, Their Advantages and Disadvantages

The roof has had many different innovations in regards to the materials used to make them. Different designs through the years have made it a necessity to find newer, lightweight and more durable... Read More

How to Deal With Contractors (So You Wont Go Mad!)

BE PREPARED -- Building a house is lots of fun, but it's a huge time investment, too. There's a ton of paperwork and planning, so it's essential to establish a system to stay... Read More

Styles And Varieties Of Locking Mailboxes For Sale

Locking mailboxes made from durable, weatherproof materials are highly desirable due to the built in safety features and the long-lasting exterior. Your mail will arrive safely and be waiting for you upon your... Read More

How Stained Glass Can Add Elegance To Your Home

If there is one way to throw a new light on your home, it's through the stained glass you put in your windows. Whether you want to enhance old windows by replacing some... Read More

What To Look For In USPS Mailboxes

High quality residential and commercial mailboxes are available in styles that meet the new standards set by the Unites States Postal Service. Postal certified mailboxes are becoming a necessary addition to your home... Read More

Replacing Steel Casement Windows

I have been getting quite a few emails from homeowners wanting to know how to replace their old steel casement windows. Those are the type with the handle that you crank and the... Read More

Keeping Stone Floors in Tip Top Condition

I had a customer call me to make a complaint about the Limestone floor we had restored and sealed for them. The building is a state of the art facility in the heart... Read More

Home Inspection Basics

The Home InspectorWhen you think about it, it is a bit odd. A person hires a stranger to snoop around another stranger's house for a couple hours and report back. It's sounds rather... Read More

Removing Your Old Sliding Glass Door

Last week I explained how to measure your existing sliding glass door so you can order the vinyl replacement door. This week I am going to go over the steps required to remove... Read More

Buyers Guide To Heavy-Built Mailboxes

If you are tired of replacing your mailbox every few months due to vandals or just poor quality construction, you need a heavy-built mailbox. Some of the more common reasons for purchasing a... Read More

Security in Todays World

There are many things in life that are worth protecting. Our children, our valuables, our resources and of course, ourselves. Only twenty years ago, if security was mentioned, you were speaking of protecting... Read More

Eclectic Patio Furniture Shows Your Style

Your home's interior is exquisitely decorated in your favorite style; why not treat your exterior with patio furniture and accessories that will be comfortable as well as beautiful. Your backyard becomes more functional... Read More

Get Your Home Ready To Sell

Have you been considering selling your home in the near future? If you have, then it wouldn't be a bad idea to take a good long look at your home, using an unbiased... Read More

Skip Troweling Method for Textured Ceilings

There are several ceiling texture choices to choose from when finishing a room. You can simply apply a flat paint to the ceiling, or spray or roll on a popcorn textured ceiling. However... Read More

Daydreaming About Your Home Makeover Projects

Most of us enjoy daydreaming about our perfect home. Do you ever think about your home just before falling to sleep? Instead of worrying about your tasks for tomorrow, try this exercise tonight:... Read More

What Does It Take To Be An Interior Designer?

When trying to decide if Interior Design is right for you, it helps to know what that really means. Interior Design is not simply the profession that "makes rooms and places pretty"; it... Read More

Single Pane Glass Repair in an Aluminum Frame, Part 2

This week we are going to continue our series on single pane window glass repair. Let's talk about broken glass in a fixed window, usually referred to as a picture window. The most... Read More

Refining Your Area Rug Choice

As a Managing Partner of www.exquisiterugs.com, the question I am often asked, "What determines the quality of a rug?" While the question posed seems relatively simple it is broad in scope... Read More

Kitchen Remodeling Costs

It is important to prepare a budget for your kitchen remodeling plan before you start implementing it. Without a complete and detailed budget prepared before the kitchen renovation begins, you may get swept... Read More

The Right Shower Curtain For Your Bathroom!

A shower curtain can add the perfect touch to any bathroom. Whether you like simple pastel colors or more elegant designs, be sure to choose the shower curtain that compliments the look of... Read More

Family Fun ? Is Swimming In A Safe Pool

Family fun is one of the most important things you can strive for to give your children some lasting memories they will always cherish; even into adulthood. Your children will always remember the... Read More

You Say Jacuzzi and I Say Whirlpool

What's in a name? Whirlpool baths have been around forever, right? If it weren't for the Jacuzzi brothers in 1956, we wouldn't have the fantastic whirlpool baths of today. According to the Jacuzzi... Read More

Heat Up the Hot Tub from 20,000 Feet

Homeowners are getting high-tech when it comes to controlling the appliances in their homes, but they insist the control systems are reliable, convenient and easily understood. Technology isn't fun to use if you... Read More