How to Remove Your Mk2 Mini Moto Engine

Many mini moto modifications will require you to remove the engine from the mini moto. This is why I have produced the following guide.

Firstly you will need to remove the mini moto's fairing.

Start with the seat fairing, unscrew the four seat screws and remove the seat. Unscrew the screw at the front end of the seat fairing and remove the petrol cap. The fairing can now be lifted from the mini moto. Replace the fuel tank petrol cap and remove the fuel tank by pulling the rubber tube of the nipple on the top of the carburettor. You may want to double the rubber fuel tube over and secure it in this position with a clothes peg. This is to stop fuel leaking out.

Remove the bottom fairing by unscrewing the holding bolts (two on each side), this frees the bottom fairing from the top. Unscrew the two bolts on the underside of the bottom fairing. The bottom fairing is now free. The top fairing is only now held on by one last bolt located in between the handle bars at the front of the mini moto.

Once you have removed the fairing, you will need to take the chain off the front sprocket. To do this loosen the back wheel nuts and the tensioning bolts. The back wheel can now be manoeuvred toward the front sprocket loosing the chain. When the chain is loose enough you can remove it from the front sprocket.

Remove the pull start from the engine by unscrewing the three holding screws. Once the pull start has been removed you will see the wire that comes from the stop switch. Unplug this.

The throttle cable can be removed from its fitting on the top of the carburettor. Pull the rubber seal up so that the locking nut can be unscrewed, the throttle can now be pulled from the carburettor along with the needle valve and spring.

The next step is to Remove the Exhaust. The exhaust is fixed to the mini motos frame by a bolt located just under the seat fairing toward the back of your mini moto. Undo this bolt with a spanner and an alan key. The exhaust is fixed to the underside of the engine by two bolts via a gasket. Remove the two bolts with an alan key making sure that you do not lose the gasket washer. The exhaust can now be slid out past the engine and removed form the mini moto.

The engine is free from its mechanical fittings, the engine then needs to be removed from the mini motos frame. The bolt at the top of the engine must be undone first using the alan key. The three screws located on the underside of the engine are the last fixings to be undone. The engine can now be completely removed from the mini moto.

Matt Tong has been importing and riding Mini Motos for two years. For expert advice and Mini Moto information please visit http://www.minimotosandmore.com

---

Necessity of Motorcycle Parts

If you are one of the many people who consider your bike as invaluable as your family, then we know you're head over heels. We may be judged heavily for this perception but... Read More

Women and Motorcycles? You Bet!

To really understand the women and her ride, one needs to go back in history to explore the courageous women who defied the norm and road their horses in the freedom of the... Read More

Fuel Cells Motorcycles, Trucks, Tanks, ATVs and Fire Hazards from Heat Exchanges

We have heard a whole lot of talk about fuel cells and of course it is a worthy endeavor. Portable generators, cars, transportation industry, Power generators, Ships, etc. can benefit. However in a... Read More

Motorcycle Tires - Why Should You Care?

One of the most important parts of any vehicle is its tires. Not only are the tires subject to a large amount of wear and tear, but also their durability depends largely upon... Read More

Save Money on Used Motorcycle Parts

For every motorcycle enthusiast, it is indeed very taxing to maintain bikes as good as new ? its engine running and all its other parts functioning. We know for a fact that it's... Read More

The Motorcycle Helmet You Want May Not Be As Safe As You Think!

Choosing the right Motorcycle helmet can make a difference?.?.literally between life and death. But how does an ordinary guy in the street make an informed decision about what kind of helmets give the... Read More

Liquid Cooled Minimotos (PocketBikes), How Fast Are They and Are They Affordable?

As the latest craze of Minimoto Madness continues in the United Kingdom. The demand for pocket bikes means that the consumer is now looking for more better quality products which are not only... Read More

Ghost Minimoto Moto GP Reps ? What Are They?

What are Mini moto's? A Minimoto is a miniature version of a real GP racing motorcycle; it just doesn't go as fast as one. There pocket bikes are available in many different makes... Read More

Motorcycle Protective Clothing That Works!

There is some great looking motorcycle clothing on the market these days, but believe me not all of the motorcycle clothing offers as much protection as you think. In Europe, for motorcycle clothing... Read More

Motorcycle Suspension: - A Troubleshooting Guide

Trouble Shooting Suspension Problems.Adjustment locations: ForksRebound adjustment (if applicable) is located near the top of the fork. Compression adjustment (if applicable) is located near the bottom of the fork. Spring preload adjustment (if... Read More

People Are Crazy... and Everyone Is A Racer

?And everyone is a racer. If you doubt that, you've obviously never driven in New York City during rush hour. Look closely at the driver of that Japanese luxury car. He's just as... Read More

Motorcycle Parts - OEM or Aftermarket ?

This is always a difficult one to answer when shopping for motorcycle parts and I firmly believe that each one of us must decide what's best for our bikes AFTER carefully evaluating each... Read More

Trackdays - Get the Maximum Enjoyment from Your Time on the Track

Many motorcyclists want to take their bikes onto the track and trackdays are the ideal environment. If you have never been on a track before the experience can feel daunting so here are... Read More

Kids Like to Ride Motorcycles Too

Roaring up on a motorcycle has a strong draw for all of us who have adopted the biker lifestyle. This draw often hits our children too. I know that for me my kids... Read More

Motorcycle Suspension Setup: Getting to Grips with a Black Art

Suspension Set-up: The basicsWhether you are a road rider or a racer correct suspension setup is the key to fast smooth riding and consistent lap times. To get the best out of your... Read More

Yamaha Motorcycles - Creativity and Spirit of Challenge

"If you are going to do something, be the best" Ginichi Kawakami, Yamaha Motor Company First President.Yamaha Motorcycles, under this motto, employing all its creativity, and with a very strong spirit of challenge,... Read More

A Convenient Way to Slash Your Gas Bill

"With oil prices spiraling higher almost every day, people are starting to look for alternative modes of transport," says Michael S. Milstead of Scootertronics. "With scooters, commuters can slash their gas bills and... Read More

Take Care of Her and Shell Do the Same ( How to start out the riding season)

Has your scoot been sitting in the garage all winter, just dying to be ridden? Or have you had the chance to only get her out a couple of times? If you answer... Read More

It?s One Thing for People to Buy Your Product or Service, but It?s Another for Them to Tattoo Your

William Harley and Arthur Davidson, both in their early twenties, built their first motorcycle in 1903. During their first year, the company's entire output was only 1 motorbike; however, by 1910, the company... Read More

0 to 60 in 4.5 Seconds

Speeding is illegal, yet we sell racing motorcycles and cars which are so powerful and look so intimidating that a police man could write the owner a ticket even if it were parked.... Read More

So You Want To Be A Custom Bike Builder? Start With A Motorcycle Kit!

So you want to be a custom bike builder? Well friend, before you rush out and buy that motorcycle kit, the one that will set you on the road to riches and fame,... Read More

A Great Motorcycle Ride in Mexico: Queretaro

A beautiful ride across cities and places named World Heritage by the Unesco, through an splendid protected natural area and ending in a surrealistic garden by artist Sir Edward James. Just keep reading...... Read More

Suzuki Motorcycles - From Fine Loom Manufacturers to Major Motorcycle Company

Started in a small warehouse by Michio Suzuki back in 1909, Suzuki aimed at making better looms for the Japanese silk industry. It was only thirty years after its existence that the company... Read More

Online Shopping for Motorcycle Accessories

When shopping for a certain item and material, the way to do it is to shop like a woman. Who else knows how to shop till they drop but women, right? Isn't it... Read More

Workings of a Motorcycle Muffler Suspension

Motorcycles are becoming more popular because of its convenience and relatively inexpensive cost compared to automobiles. They are capable of the same speeds as cars and can also be licensed for use on... Read More

The Buzz is All About Mini-Motorcycles

Pocket bikes are miniature motorcycles -- powered, for the most part, by oil- and gas-burning engines similar to those used in chain saws, weed whackers or other small motorized tools -- and they... Read More

Do You Need a Part for Your Harley Davidson Motorcycle?

Need a Harley Davidson Part for your ride?Where do you get a good quality Harley Davidson Part? Can I use an aftermarket part?These questions are not easy to answer. It depends a lot... Read More

How To Make Your Own Vintage Motor Cycle & Automotive Spare Parts

Vintage Car & Motorcycle restoration enthusiasts all share one thing in common...The difficulty in obtaining obsolete spare parts.How many times have you tried to find a special part for your restoration project, only... Read More

Motorcycle Accidents: Preparing Your Case

Motorcycle accident is an unexpected occurrence that results to shock and trauma, serious physical injuries and death. The most common reason of a motorcycle accident, which contributed to the 50% of the motorcycle... Read More